D-Link DIR855L PPPoE DSL, Enable True, Reconnect Mode Select either Always-on,On-Demand or Manual

Section 3 - Configuration

Manual Internet Setup

PPPoE (DSL)

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.

My Internet Select PPPoE (Username/Password) from the drop-down menu.

Connection:

Enable Advanced Domain Name System (DNS) services enhances your Internet Advanced DNS performance by getting you the information and web pages you are looking for Service: faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where

you intended to go and saving you valuable time.

Disclaimer:D-Linkmakesnowarrantyastotheavailability,reliability,functionality and operation of the Advanced DNS service or its features.

Enable True

Gigabit Routing Check to enable true Gigabit routing. This will increase the through-put of

Connectivity: the WAN-LAN connectivity of the router.

Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway,

and DNS server addresses. In most cases, select Dynamic.

IP Address: Enter the IP address (Static PPPoE only).

User Name: Enter your PPPoE user name.

Password: Enter your PPPoE password and then retype the password in the next box.

Service Name: Enter the ISP Service Name (optional).

Reconnect

Mode: Select either Always-on,On-Demand or Manual.

D-Link DIR-855L User Manual 31