Section 3 - Configuration
Network Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers, by their MAC addresses, from accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the router.
Configure MAC SelectTurnMACFilteringOff, AllowMACaddresses
Filtering: listed below, or Deny MAC addresses listed below
from the
MAC Address: Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer to the Networking Basics section in this manual.
DHCP Client: Select a DHCP client from the
Clear: Click to remove the MAC address.
76 |