90D-Link DIR-855L User Manual
Section 3 - Conguration
IPv6 Firewall

The DIR-855L’s IPv6 Firewall feature allows you to congure which kind of IPv6 trac is allowed to pass through the device. The

DIR-855L’s IPv6 Firewall functions in a similar way to the IP Filters feature.

Check to enable the IPv6 rewall simple security.
Check to enable IPv6 ingress lter.
Select an action from the drop-down menu.
Enter a name to identify the IPv6 Firewall Rule.
Use the drop-down menu to select the time
schedule that the IPv6 Firewall Rule will be enabled
on. The schedule may be set to Always, which will
allow the particular service to always be enabled.
You can create your own times in the Tools >
Schedules section.
Use the Source drop-down menu to specify
the interface that connects to the source IPv6
addresses of the rewall rule.
Enter the source IPv6 address range in the adjacent IP Address Range eld.
Use the Dest drop-down menu to specify the interface that connects to the destination IP addresses of the rewall rule.
Select the protocol of the rewall port (All, TCP, UDP or ICMP).
Enter the rst port of the range that will be used for the rewall rule in the rst box and enter the last port in the eld in the second
box.
Enable IPv6 Simple
Security:
Enable IPv6
Ingress Filtering:
Congure IPv6
Firewall:
Name:
Schedule:
Source:
IP Address Range:
Dest:
Protocol:
Port Range: