DSL-300 ADSL Modem User’s Guide
ADSL Line Status
Operation Path | This describes the method used for data transfer on the network backbone. | |
It should read either Fast or Interleave. | ||
| ||
|
| |
Operation Mode | The ADSL operation mode is detected automatically by the Mode. This tells | |
you what mode is being used. It should read either G.dmt or G.lite. | ||
| ||
|
| |
Upstream | Data transfer speed from the Modem to the ISP’s network and the Internet | |
|
| |
Downstream | Data transfer speed from the ISP’s network and the Internet to the Modem | |
|
|
Current Firmware Version
Current Firmware Version | Firmware version running on Modem |
|
|
ADSL Driver Version | ADSL driver used for connection |
|
|
Bridge Connection Summary Screen
If the Modem is configured to use a bridged connection the summary statistics listed are different from using the other connection types. The global IP address is not listed in the summary since this information is actually located on your computer. To view the IP address of your system, look at the Properties of the TCP/IP protocol installed on your system. For a bridged connection, these are your global IP settings. The connection software installed on your system may also have summary screen you can view.
Click the Refresh hyperlink to update the statistics in the Summary screen.
Figure 13. Summary Statistics in Bridge Mode
25
