DSL-300 ADSL Modem User’s Guide
Change Connection Type to PPPoA
To change the connection type to PPPoA and connect to the Internet, follow these steps:
1.In the Account Configuration window, select PPPoA from the Connection Type
Figure 5. PPPoA Account Configuration – Initial Set Up
2.DO NOT change the Encapsulation setting unless your ADSL service provider or ISP has instructed you to change it. By default, the LLC is selected. If you are told to change this, select VC Mux from the
3.In the User Name entry field, type the user name used to identify your account.
4.In the Password entry field, type the password used to authenticate your account
5.DO NOT change the Authentication method unless your ADSL service provider or ISP has instructed you to change it. By default, the pap protocol is selected. If you are told to change this, select chap from the
6.Leave the Connect on Demand option enabled in the
7.Leave Idle Time set to the 0. This tells the Modem to maintain the “always on” connection, even when you are not using the Internet.
8.Click on the OK button.
16
