D-Link DSL-514 manual Product Features, Front Panel

DSL-514 ADSL Router User’s Guide

Product Features

The D-Link DSL-514 ADSL Router provides the following features: ‧Data rates up to 8 Mbps for downstream and 1M bps for upstream

‧Friendly web-based graphical user interface for configuration and management ‧Supports up to eight simultaneous virtual connections for a single ADSL account ‧Supports T1.413 issue 2, G.dmt and G.lite standards

‧Auto-handshake and rate adaptation for different ADSL flavors ‧Widest range of DSLAM interoperability

‧Bridge IP over ATM LLCSNAP (RFC 1483) ‧Built-in MIBs for SNMP management ‧Upgradeable firmware through HTTP

Front Panel

Place the Router in a location where the LED indicators can be easily viewed.

The LED Indicators read as follows:

Power Steady green light indicates the unit is powered on.

Status Blinking green indicates normal operation.

Local Network A solid light indicates a connection, a blinking light indicates data transmission to an Ethernet-enabled computer on ports 1-4.

ADSL: Link/Act Steady green light indicates a valid ADSL connection. This will light after the ADSL negotiation process has been settled. Blinking green light indicates an active WAN session.

2