DSL-514 ADSL Router User’s Guide
Routing
The Route Table page displays routing table and allows the user to manually enter the routing entry. The routing table will display the routing status of Destination, Netmask, Gateway and Interface. The interface lo0 means the loop back interface; and ppp1 means the PPP interface. The Gateway is the learned Gateway.
Destination: Specifies the IP address of the destination computer. The destination can specifiies as the IP address of a specific computer or an entire network. It can also be specified as all zeros to indicate that this route should be used for all destinations for which no other route is defined (this is the route that creates the default gateway)
Netmask: Indicates which parts of the destination address refer to the network and which parts refer to a computer on the network.
Gateway: This field allows the user to enter the IP address of the gateway device that allows the router to contract the remote network or the host for Specified IP or select an Interface for the Gateway.
Interface: This field allows user to select a Network Interface from a list (PVCs, PPP sessions and LAN). This option lets the user to associate the
55
