3

Input Select

 

 

 

 

 

 

 

 

 

• Select [Component 1 or Component 2] by

 

 

INPUT

pressing the INPUT SELECT button of the

 

 

SELECT

Remote Control or the PDP unit.

• Each time you press the INPUT SELECT button, different input modes appear. The sequence is as follows: Component 1 --> Component 2 --> Video 1 --> Video 2 --> PC.

Component1

Component2 Video1

PC

 

Video2

4 Select a Desired Channel and Function

• Select a desired channel and function by using the Remote Control of Digital Broadcasting Receiver.

NOTES:

1)You can select INPUT SELECT while you are using OSD(Menu). Sequence: [Menu] --> [Input] --> [Component 1 or 2 (DTV/DVD)]

2)Digital Broadcasting signals available: 1080i(60Hz), 720p(60Hz), 480p(60Hz)

3)Antenna Connection:

Apartment : Check if community antenna receives digital broadcasts.

Private Houses: Set the indoor/outdoor UHF antenna to the direction of the digital broadcasting transmitting company.

4)For detailed connection method, refer to the Owner’s Manual of Digital Broadcasting Receiver.

5)What is a component? : Signal with which brightness and color signals are separated, producing a sharp screen.

6)If the Digital Broadcasting Receiver has PC Output terminal (D-sub15pin), connect to ‘PC INPUT’ at the back panel of the PDP. When watching the PDP by PC Input, some undesired signals may be seen at the top and bottom area of the screen. In this case, select [Menu] --> [Screen] --> [Vertical Size] to adjust.

17

Page 17
Image 17
Daewoo DP-42SM, DP-42WM Input Select, Select a Desired Channel and Function, Remote Control or the PDP unit, Video2