Daewoo DP-42GM, DP-42WM Connecting PC, Before connecting to the PDP, set Resolution of the PC

Connecting PC

•DAEWOO PLAZMA supports resolution of VGA, SVGA, XGA, SXGA, UXGA.

•Before connecting a PC to the PDP, be sure to adjust the resolution of PC.

•This product is not supported by Plug and Play, so select Standard Monitor when setting PC monitor.

Connecting PC

Before connecting to the PDP, set the

1 resolution of the PC.

• Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window Screen.

• Choose the SETTINGS tab in the DISPLAY Menu.

• In the SETTINGS Menu, select 640x480 or 800x600.

2 Connect the PC to the PDP.

• Prepare the PC cable (D-sub 15pin) and the PC audio cable(Sold seperately).

• Connect the PC(Output) to thePDP(Input) as shown below.

R

AUDIO

L

PC INPUT

Audio 15 PIN D-sub

PC

28