Deassembly and Replacement | Daewoo VCR MECHANISM UNIT instruction

DEASSEMBLY AND REPLACEMENT

1.Removal of the FRONT LOADING Ass’y (Fig. 3.1)

NOTE:

Remove the FRONT LOADING Ass’y in eject mode.

a.Unscrew the 2 screw holding the F/L.

b.Separate the F/L Ass’y from the MAINBASE settling down point by lifting the rear part of F/L (Screw Hole).

Fig. 3.1 Removal of the FRONT LOADING Ass’y

2.Deassembly of FRONT LOADING Ass’y (FIg. 3.2~3.5)

a.Remove the 1 washer for holding the door opener and separate F/L Assembly by moving the DOOR OPENER in the direction of arrow.

b.Remove the 2 screw holding the TOP PLATE and sepa- rate the CASSETTE HOLDER Ass’y by moving the FL BRKT L and FL BRKT R in the direction of arrow. (Fig. 3.2)

FIg. 3.2 Deassembly of the FRONT LOADING Ass’y

c.Separate the FL LIFT SPRING by twisting and dragging from FL BRKT R. (Fig. 3.3)

FIg. 3.3 Deassembly of the FL BRKT Ass’y

10

Image 11

Daewoo VCR MECHANISM UNIT service manual Deassembly and Replacement, Removal of the Front Loading Ass’y Fig

Contents

VCR Mechanism Unit Contents Assembly diagram Deck Assembly diagram A. Upper View Assembly Diagram and A/S Lower View Front Loading Assembly diagram Wire Diagram Connector Pin Arrangement Wire Diagram Periodic Maintenance and Service Schedule Periodic Maintenance and Service Schedule Service Schedule for the Major Parts Service Schedule for the Major Parts List of Jigs and Tools Jigs and Tools Sketch of Jigs and Tools Removal of the Front Loading Ass’y Fig Deassembly and ReplacementDeassembly of Front Loading Ass’y .2~3.5 Deassembly of the Cassette Holder Ass’y Deassembly of Drum Ass’y Fig Deassembly of the Loading RACK, Loading Deassembly of the A/C Head ASS’Y Fig 10 Deassembly of the LC Bracket ASS’Y from Deassembly of the CAM GEAR, Relay LEVER, FL Rack Fig Deassembly of the FE Head Fig Deassembly of the Tension Band ASS’Y FigDeassembly of the Capstan Motor Fig Deassembly of the Reel TABLE, Idler Plate Total ASS’Y Fig Deassembly of the Reel Brkt Total ASS’Y, Connect Plate Fig Mechanical Adjustment .1~4.4 Mechanical Adjustment Assembly reference between the Loading Rack Adjustment and measurement of the Back Tension .5 Adjustment of the position of the Tension Pole Fig Mechanical Mode Operate without a cassette tape A schematic diagram of the tape transporting section Adjustment of the Tpae Transporting Section Cleaning Adjustment of the Tpae Transporting System Adjustment of the Audio AZIMUTHFig Adjustment of the S/T Guide RollerAdjustment of the AC Head ASS’YTILT Adjustment of the AC Head HeightFig Adjustment of the LINEARITYFig Playback Phase ADJUSTMENTFig Review Adjustment of the wave form of Drum Entrance / Exit Fig Position Adjustment of the Audio Azimuth Exploded view of Deck Ass’y Top View Exploded View and Parts List Exploded view of Deck Ass’y Bottom View Exploded view of FL Ass’y Exploded view Drum Total Ass’y D0040 D0020 D0050 D0010 D0060 D0070 LOC Part S/N Part Name Part Discription Ntsc M1OOO Parts List of Deck Total Ass’y continud Parts List of Deck Total Ass’y LOC Part S/N Part Name Part Discription Ntsc Mail G7F00E@web.dwe.co.kr TEL FAX