Daewoo VCR MECHANISM UNIT instruction

DEASSEMBLY AND REPLACEMENT (CONTINUED)

12.Deassembly of the REEL TABLE, IDLER PLATE TOTAL ASS’Y (Fig. 3.16)

a.Remove the POLY WASHER !and separate the IDLER PLATE TOTAL Ass’y @from the mainbase.

b.Remove the REEL TABLE $from the REEL TABLE POST #of the MAINBASE.

CAUTION:

•Take care not to deform the IDLER PLATE TOTAL Ass’y @when assembling and deassembling.

FIg. 3.16 Deassembly of the REEL TABLE and the IDLER

PLATE TOTAL ASS’Y

13.Deassembly of the REEL BRKT TOTAL ASS’Y, CONNECT PLATE (Fig. 3.17)

a.Turn over the DECK MECHANISM and remove the 2 screw !.

b.Remove the REEL BRKT TOTAL Ass’y @from the

MAINBASE.

c.Separate the CONNECT PLATE #from the MAIN- BASE by pushing to the direction of the arrow.

CAUTION:

•In deassembly of the REEL BRKT TOTAL Ass’y, take care REEL BELT and REEL FELT not to be stained with Grease, Oil or Foreign substance.

•Deassembly of the IDLER Ass’y should be precede the deassembly of the REEL BRKT TOTAL Ass’y.

•Check the operation of the REEL BRKT TOTAL Ass’y before assembly.

•Check the operation of FF/REW, PLAY, CUE and REVIEW work well and existence of noise during the mode operation.

FIg. 3.17 Deassembly of the REEL BRKT TOTAL ASS’Y

and the CONNECT PLATE

15

Image 16

Daewoo VCR MECHANISM UNIT service manual Deassembly of the Reel Brkt Total ASS’Y, Connect Plate Fig

Contents

VCR Mechanism Unit Contents Assembly Diagram and A/S Assembly diagram Deck Assembly diagram A. Upper View Lower View Front Loading Assembly diagram Wire Diagram Wire Diagram Connector Pin Arrangement Periodic Maintenance and Service Schedule Periodic Maintenance and Service Schedule Service Schedule for the Major Parts Service Schedule for the Major Parts Jigs and Tools List of Jigs and Tools Sketch of Jigs and Tools Deassembly of Front Loading Ass’y .2~3.5 Deassembly and ReplacementRemoval of the Front Loading Ass’y Fig Deassembly of Drum Ass’y Fig Deassembly of the Cassette Holder Ass’y Deassembly of the A/C Head ASS’Y Fig Deassembly of the Loading RACK, Loading Deassembly of the CAM GEAR, Relay LEVER, FL Rack Fig 10 Deassembly of the LC Bracket ASS’Y from Deassembly of the Capstan Motor Fig Deassembly of the Tension Band ASS’Y FigDeassembly of the FE Head Fig Deassembly of the Reel Brkt Total ASS’Y, Connect Plate Fig Deassembly of the Reel TABLE, Idler Plate Total ASS’Y Fig Mechanical Adjustment Mechanical Adjustment .1~4.4 Adjustment and measurement of the Back Tension .5 Assembly reference between the Loading Rack Mechanical Mode Operate without a cassette tape Adjustment of the position of the Tension Pole Fig Adjustment of the Tpae Transporting Section A schematic diagram of the tape transporting section Adjustment of the Tpae Transporting System Cleaning Adjustment of the S/T Guide Roller Adjustment of the AC Head ASS’YTILTAdjustment of the AC Head HeightFig Adjustment of the Audio AZIMUTHFig Playback Phase ADJUSTMENTFig Adjustment of the LINEARITYFig Adjustment of the wave form of Drum Entrance / Exit Fig Review Adjustment of the Audio Azimuth Position Exploded View and Parts List Exploded view of Deck Ass’y Top View Exploded view of Deck Ass’y Bottom View Exploded view of FL Ass’y D0040 D0020 D0050 D0010 D0060 D0070 Exploded view Drum Total Ass’y LOC Part S/N Part Name Part Discription Ntsc M1OOO Parts List of Deck Total Ass’y continud Parts List of Deck Total Ass’y LOC Part S/N Part Name Part Discription Ntsc Mail G7F00E@web.dwe.co.kr TEL FAX