DEASSEMBLY AND REPLACEMENT (CONTINUED)
8. Deassembly of the S/T BRAKE ASS’Y (Fig. 3.13)
a.Unhook the S BRAKE SPRING #from the MAIN- BASE HOOK !.
b.Remove the S BRAKE Ass’y @from the mainbase.
c.Remove the T BRAKE SPRING ^from the MAIN- BASE HOOK $.
d.Remove the T BRAKE Ass’y %.
FIg. 3.13 Deassembly of the S/T BRAKE ASS’Y |
9.Deassembly of the TENSION BAND ASS’Y (Fig. 3.14)
a.Unhook the TENSION SPRING @from the MAIN- BASE HOOK !.
b.Unhook the MAINBASE HOOK “A” and remove the TENSION BAND Ass’y #from the mainbase.
CAUTION:
•After the assembly of TENSION BAND Ass’y on the mainbase, adjust the TENSION POLE location as shown in Fig. 3.15.
•Avoid getting Grease, Oil or Foreign substance on the FELT of the BAND BRAKE.
•Take care not to deform the MAINBASE HOOK “A” when separating the TENSION BAND Ass’y #.
10.Deassembly of the Capstan Motor (Fig. 3.14)
a.Separate the CAPSTAN MOTOR %after the removal of 3 screw $holding the capstan motor.
11. Deassembly of the FE HEAD (Fig. 3.14)
a.Unscrew the screw ^and separate the FE HEAD & from the MAINBASE.
FIg. 3.14 Deassembly of the TENSION BAND ASS’Y, |
CAPSTAN MOTOR and the FE HEAD |
FIg. 3.15 Adjustment of the TENSION POLE POSITION |
14
