DEASSEMBLY AND REPLACEMENT (CONTINUED)
d.Separate the LOADING LEVER Ass’y by pressing the connection point from the CASSETTE HOLDER Ass’y. (Fig. 3.4)
e.Remove the SAFETY SPRING connecting the SAFETY LEVER and CASSTTE HOLDER PLATE. (Fig. 3.4)
f.Remove the RELEASE SPRING connecting the RELEASE LEVER and SAFETY LEVER. (Fig. 3.4)
FIg. 3.4 Deassembly of the CASSETTE HOLDER Ass’y |
CAUTION: |
•Assemble the FRONT LOADING Ass’y in the reverse step of deassembly.
•Confirm that 2 bosses on the left side of the CASSETTE HOLDER Ass’y are inserted in the groove on the left side of the top plate. Insert 2 bosses on the right side of the CASSETTE HOLDER Ass’y into the groove of the F/L BRACKET R. (Fig. 3.5)
FIg. 3.5 Assembly of the FL Ass’y |
3. Deassembly of DRUM Ass’y (Fig. 3.6)
a.Turn over the DECK MECHANISM and holding the DRUM TOTAL Ass’y @with hands, remove the 3 screw holding the drum total assembly with mainbase.
b.Separate the DRUM TOTAL Ass’y from the deck paying attention there is no damage on the surface of VIDEO HEAD and DRUM.
c.Assembly step is the reverse way of deassembly.
CAUTION:
•After the assembly of the DRUM TOTAL Ass’y, check out if DECK Mechanism operate smoothly and adjust- ment of tape transmission section is OK.
FIg. 3.6 Assembly of the DRUM TOTAL Ass’y |
11
