APPENDIX “A”
INSERTING, REMOVING & ADJUSTING THE BURN GRATE
The burn grate top, (G), must fit and seal firmly on the upper lips, of the burn box, (A). An improper seal will allow incoming combustion air to escape, not passing up through the burn grate thus reducing the amount of combustion air in the area needed to efficiently burn pellets.
A Burn box
combustion air is brought into the backside and through the burn grate bottom, back, and front
-Check periodically for fly ash build up
-
B“SUPER” Grate Stainless steel construction, slotted bottom and air holes on front and back
CAdjustment Tab,
-used to fine tune, and level burn grate
G Upper Grate Lip
B |
G |
C |
A |
Copyright 2004 | 31 | Cheap Charlie Owner’s Manual |
Canadian Comfort Industries | www.dansons.com | Dansons Group Inc. |
