GUIDE TO INSTALLATION

The following can be used as a checklist to verify all of the steps necessary for complete installation of the Matrix-1000compact 2D reader.

1)Read all information in the section "Safety Precautions" at the beginning of this manual.

2)Correctly mount the reader using the bracket provided (sub-pars. under 2.2).

3)Position the reader at the correct reading distance according to your model (par. 2.5).

4)Make electrical connections to your Matrix-1000™ reader by either:

a)Connecting the test cable to the Matrix-1000™ reader (par.2.4).

b)Providing correct and complete system cabling according to the signals necessary for the layout of your application.

•Layout: Point-to-point or Multidrop, etc. (sub-pars: 2.6);

•Cabling: Power, Main RS485, Auxiliary RS232, External Trigger Input and Output (sub-pars. under 2.3).

5)Configure the Matrix-1000™ reader by installing and running VisiSet™ from the CD-ROM provided onto the configuration PC (pars. 3.1, 3.2, 3.3). See the Rapid Guide to Configuration in the VisiSet™ Help On Line. The main steps are:

a)Select the codes to be read

b)Set-up the communication parameters

c)Define data formatting parameters

d)Fine tune your Matrix-1000™ reader using the VisiSet™ Calibration Tool (par. 3.4.2).

Specific VisiSet™ parameter details are also available in the Help On Line.

6)Exit the configuration program and run your application.

The installation is now complete.

viii