Datalogic Scanning 1000 2.6TYPICAL LAYOUTS, 2.6.1Point-to-Point

INSTALLATION 2

2.6TYPICAL LAYOUTS

The following typical layouts refer to system hardware configurations. However, they also require the correct setup of the software configuration parameters. Dotted lines in the figures refer to optional hardware configurations within the particular layout.

2.6.1Point-to-Point

In this layout the data is transmitted to the Host on the Matrix-1000aux serial interface.

Parameter configuration can always be accomplished using the Matrix-1000auxiliary interface.

When either Phase Mode or One Shot operating mode are used, the reader can be activated by an external event (for example a pulse from a photoelectric sensor) when the object enters its reading zone.

CAB-600X

C-BOX 100

Matrix-1000™

Local Host

P.S.

PG6000

Auxiliary Interface (Local Echo)

External Trigger

Figure 26 - Point-to-Point Layout

25