DriveRack® | Front Panel Operation | Section 3 |
2.Use the PREV and NEXT buttons to navigate through the pages of meters.
3.To exit Meter menus and return to Edit mode, press the PRESET button.
Wizard Mode - The Wizard mode will provide you with setup functions. The Wizard mode is not func- tional in v1.00.
1. While in Edit mode press the WIZARD/CONFIG button.
2.Use the PREV and NEXT buttons to navigate through the Wizard pages.
3.To exit the Wizard and return to Edit mode without making any changes, press the PRESET button.
Configuration Mode - The DriveRack 4800 is configurable from the front panel through the Configuration mode. This mode lets you create a signal path and a combination of processing functions.
1. While in Edit mode press and hold the WIZARD/CONFIG button for two seconds.
2.Use the CHANNEL and FUNCTION buttons to navigate around the processing matrix.
3.In positions where a change of processing is possible, turning the Encoder #1 knob will accomplish this change.
4.To link adjacent like functions, turn Encoder #3 knob.
®
DriveRack® 4800/4820 User Manual | 17 |
|
|
