DCS BGB" Series manual Access Drawers Cutout dimensions

INSTALLATION

BUILT–IN CONSTRUCTION DETAILS

Access Drawers

Cutout dimensions

Access Doors - Cutout dimensions

Vent*

Vent*

FIG. 06

NOTE: The cutout of each corner should be 90ºangle in order for the access drawers to fit properly.

*Island installation to use minimum of 3 vents, 10 square inches per vent (typical).

**For proper support and drawer operation, insure that support boards are installed per Installation Guide instructions.

MODEL NUMBER	A	B	C
	(+0,-1/8)	(+1/8,-0)
ADR48	46”	20”	24-1/2”
ADR36	34”	20”	(Min,
ADR30	28”	20”	All
ADR24	22”	20”	Models)

A

B Vent*

90º

Cutout for Access Doors

FIG. 07

NOTE: The cutout of each corner should be 90ºangle in order for the access doors to fit properly.

*Island installation to use minimum of 3 vents, 10 square inches per vent (typical).

MODEL NUMBER	A	B
	(+0,-1/8)	(+1/8,-0)
ADN 20x48	46”	20”
ADN 20x36	34”	20”
ADN 20x30	28”	20”
ADN 20x24	22”	20”

11