12 CAUTION: Safety Instructions
www.dell.com | support.dell.com
FILE LOCATION: C:\Documents and Settings\patricia_drake\Desktop\New Folder\D5016si0.fm
DELL CONFIDENTIAL – PRELIMINARY 3/18/04 – FOR PROOF ONLY
• Clean the display with a soft, clean cloth and water. Apply the water to the cloth; then stroke the cloth across the
display in one direction, moving from the top of the display to the bottom. Remove moisture from the display
quickly and keep the display dry. Long-term exposure to moisture can damage the display. Do not use a
commercial window cleaner to clean your display.
• If your computer gets wet or is damaged, follow the procedures described in "If Your Computer Gets Wet" on
page67 or "If You Drop or Damage Your Computer" on page68. If, after follow ing these procedures, you confirm
that your computer is not operating properly, contact Dell (see page106 for the appropriate contact information).
SAFETY: Ergonomic Computing Habits

CAUTION: Improper or prolonged keyboard use may result in injury.

CAUTION: Viewing the display or external monitor screen for extended periods of time may result in eye strain.

For comfort and efficiency, observe the ergonomic guidelines in the Dell Latitude 100L Help file when setting up and
using your computer. To access the help file, see page16.
This portable computer is not designed for continuous operation as office equipment. For extended use in an off ice, it is
recommended that you connect an external keyboard.
SAFETY: When Working Inside Your Computer
Before removing or in stalling memory modules, Mini PCI cards, or modems, perform the following steps in the
sequence indicated.

NOTICE: The only time you should ever access the inside of your computer is when you are installing memory

modules, a Mini PCI card, a modem, a CD or DVD drive, or a keyboard.

NOTICE: Wait 5 seconds after turning off the computer before disconnecting a device or removing a memory

module, Mini PCI card, modem, CD or DVD drive, or keyboard to help prevent possible damage to the system board.

1

Shut down your computer and turn off any attached devices.

2

Disconnect
your computer and devices from electrical outlets to reduce the potenti al for personal injury or shock.
Also, disconnect any telephone or telecommunication lines from the computer.

3

Remove the main battery from the battery bay.

4

Ground yourself by touching any unpainted metal surface on the back of the computer.

5

While you work, periodically touch the unpainted metal surface to dissipate any static electricity that might harm
internal components.
SAFETY: Protecting Against Electrostatic Discharge
Static electricity can harm electronic components inside your computer. To prevent static damage, discharge static
electricity from your body before you touch any of your computer’s electronic components, such as a memory module.
You can do so by touching any unpainted metal surface on the back of the computer.
As you continue to work inside the computer, periodically touch any unpainted metal surface on the back of the
computer to remove any static charge your body may have accumulated.
You can also take the following steps to prevent damage from electrostatic discharge (ESD):
• When unpacking a static-sensitive component from its shipping carton, do not remove the component from the
antistatic packing material until you are ready to install the component. Just before unwrapping the antistatic
packaging, be sure to discharge static electricity from your body.