70 Adding Parts
www.dell.com | support.dell.com
7To insert a module, press out the securing clip at each end of the
memory connector.
8Align the notches on the bottom of the module with the crossbars in
the connector.
NOTICE: To avoid breaking the memory module, do not press near the middle
of the module.
9Insert the module straight down into the connector, making sure that
it fits into the vertical guides at each end of the connector.
Press firmly on the ends of the module until it snaps into place.
If you insert the module correctly, the securing clips snap into the
cutouts at each end of the module.
securing clips (2)
notches (2)
step7
memory module
cutouts (2)
connector
step8
step9
memory connectors
on system board