14 Setup and Quick Reference Guide
www.dell.com | support.dell.com
Attaching the Stand
NOTE: If you are
installing the computer
under a desktop or
tabletop, first attach all
cables, and then attach
the stand to the mounting
plate (see "Attaching the
Stand to the Mounting
Plate" on page 19).
1Raise the captive screw and slide the chassis stand slat into one of
three mounting slots on the back of the computer.
2When the stand is in place, tighten the screw.
NOTICE: If your computer is oriented under a desktop or tabletop and is in a
high-vibration environment, use the optional wall-mount bracket instead of the
computer stand.
Connecting the AC Adapter
NOTE: The power
adapter LED will light
when the adapter is
properly plugged into a
wall outlet and into the
computer.
1Connect the power adapter to the connector on the back of the
computer.
2Connect the power cable to the power adapter.
NOTICE: The following steps apply to Japan only.
3
4