44 Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1Connect the camera cable to the connector on the camera module.
2Use the alignment posts on the display cover to place the camera module in position and adhere the camera module to the display cover.
Postrequisites
1Replace the display bezel. See "Replacing the Display Bezel" on page 91.
2Replace the display assembly. See "Replacing the Display Assembly" on page 87.
3Replace the battery. See "Replacing the Battery" on page 33.
4Replace the palm rest. See "Replacing the Palm Rest" on page 29.
5Replace the keyboard. See "Replacing the Keyboard" on page 25.
6Replace the base cover. See "Replacing the Base Cover" on page 19.
7Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the Camera Module | 103 |
