Replacing the Base Cover | 19
6Replacing the Base Cover
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Procedure
1Slide the tabs on the base cover into the slots on the computer base and snap the
base cover into place.
2Tighten the captive screw that secures the base cover to the computer base.
Postrequisites
Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 19 Tuesday, April 17, 2012 11:08 AM