Replacing the Speakers | 69
28 Replacing the Speakers
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Procedure
1Route the speakers cable through the routing guides on the computer base.
2Use the alignment posts on the computer base to place the speakers in position.
3Adhere the LED-board cable on the computer base and fan.
4Slide the LED-board cable into the system-board connector and press down on the
connector latch to secure the cable.
5Connect the speakers cable to the I/O-board connector.
Postrequisites
1Follow the instructions from step 4 to step 6 in "Replacing the Hard Drive" on
page 55.
2Replace the battery. See "Replacing the Battery" on page 33.
3Replace the palm rest. See "Replacing the Palm Rest" on page 29.
4Replace the keyboard. See "Replacing the Keyboard" on page 25.
5Replace the base cover. See "Replacing the Base Cover" on page 19.
6Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 69 Tuesday, April 17, 2012 11:08 AM