86 | Removing the Display Assembly
Procedure
1Disconnect the antenna cables from the connectors on the wireless Mini-Card(s).
See "Removing the Wireless Mini-Card(s)" on page 39.
2Make a note of the antenna cables routing and remove the cables from the
routing guides.
3Turn the computer over and open the display as far as possible.
4Pull the antenna cables up through the slot on the computer base.
5Pull the pull-tab to disconnect the display cable from the system-board connector.
6Remove the screws that secure the display assembly to the computer base.
7Lift the display assembly off the computer base.
1 display assembly 2 screws (4)
3 display cable 4 pull-tab
1
2
3
4
book.book Page 86 Tuesday, April 17, 2012 11:08 AM