Procedure
NOTE: Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS after you replace the system-board assembly.
NOTE: Before disconnecting the cables from the system-board assembly, note the location of the connectors so that you can reconnect them correctly after you replace the system-board assembly.
1Pull the pull-tab to disconnect the display cable from the system-board connector.
2Remove the screws that secure the system-board assembly to the computer base.
3Turn the system-board assembly over along with the hard-drive cable.
2 3
4
1
1 | system-board assembly | 2 | display cable |
| | | |
3 | pull-tab | 4 | screws (4) |
| | | |
76 Removing the System Board
