68 | Removing the Speakers
Procedure
1Disconnect the speakers cable from the I/O-board connector.
2Lift the connector latch and pull the pull-tab to disconnect the LED-board cable
from the system-board connector.
3Make a note of the LED-board cable routing and peel it from the fan and
computer base.
4Remove the speakers from the alignment posts on the computer base.
5Make a note of the speakers cable routing and remove it from the routing guides on
the computer base.
6Lift the speakers along with its cable away from the computer base.
1 connector latch 2 pull-tab
3 LED-board cable 4 speakers (2)
5 speakers cable routing 6 speakers cable
7 I/O board
1
2
3
4
6
7
5
book.book Page 68 Tuesday, April 17, 2012 11:08 AM