52 | Removing the Display Assembly
Procedure
1Peel off the tape, lift the latch, and disconnect the display cable from the system
board.
2Disconnect the camera cable from the system board.
3Peel the tape off the camera cable.
4Note the camera cable routing and remove the cable from the routing guides on
the palm-rest assembly.
5Remove the screws that secure the display hinges to the palm-rest assembly.
1screws (3) 2tape
3 latch 4 display cable
5 tape 6 display hinges (2)
7camera cable
7
3
6
2
1
5
4