Dell 7537, P36F Replacing the USB Board

38 | Replacing the USB Board
Replacing the USB Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1Using the alignment posts, place the USB board on the palm-rest assembly.
2Slide the USB-board cable into the USB-board connector and press down on the
connector latch to secure the cable.
3Adhere the tape that secures the USB-board cable to the USB board.
Postrequisites
1Replace the bottom cover. See"Replacing the Bottom Cover" on page 28.
2Replace the keyboard. See "Replacing the Keyboard" on page 24.
3Replace the wireless card. See "Replacing the Wireless Card" on page 20.
4Replace the hard drive. See "Replacing the Hard Drive" on page 18.
5Replace the battery. See "Replacing the Battery" on page 13.
6Replace the base cover. See "Replacing the Base Cover" on page 11.