Dell 946 owner manual What if I Have a Digital Subscriber Line DSL?

Models: 946

1 101
Download 101 pages 27.75 Kb
Page 57
Image 57

1.Connect a phone cord from the FAX connector ( - left side connector) on the printer to the telephone wall jack.

2.Remove the protective plug from the PHONE jack connector ( - right side connector).

3.Connect a phone cord from the computer modem to the PHONE jack connector ( - right side connector).

4.Connect a phone from the computer modem to a telephone.

NOTE: If the phone communication is serial in your country (such as Germany, Sweden, Denmark, Austria, Belgium, Italy, France, and Switzerland), you must remove the blue plug from the PHONE jack

connector ( - right side connector), and insert the supplied yellow terminator for your fax to work correctly. You will not be able to use this port for additional devices in these countries.

What if I Have a Digital Subscriber Line (DSL)?

DSL delivers digital data to a computer through a telephone line. Your printer is designed to work with analog data. If you are faxing over a telephone line connected to a DSL modem, install a DSL filter to avoid interference with the analog fax modem signal.

NOTE: ISDN (integrated services digital network) and cable modems are not fax modems and are not supported for faxing.

1.Connect the DSL filter to an active telephone line.

2.Connect the printer directly to the output of the DSL filter.

Page 57
Image 57
Dell 946 owner manual What if I Have a Digital Subscriber Line DSL?