Dell 9T217 manual Frequently Asked Questions, Record your Express Service Code and Service Tag

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Light Pattern	Problem Description	Suggested Resolution
GGGG	Normal operating	None.
	condition after POST.

If a computer problem occurs that you are unable to resolve through the steps in this section or the procedures in "Finding Solutions" in your User’s Guide, complete the following steps before you contact Dell:

1Write a detailed description of the error, beep code, or diagnostic light problem.

2Record your Express Service Code and Service Tag.

3Contact Dell from the same location as your computer.

Frequently Asked Questions

How Do I...	Solution	Where to Find Additional
		Information

Set up my computer to use two monitors?

Connect my monitor when the monitor cable connector doesn’t seem to fit the connector on the back of my computer?

If your computer has the required graphics card to support dual- monitor setup, then look in your box for a Y-cable. The cable has a single connector on one end (plug this connector into the back panel) and branches into two connectors (plug these connectors into the monitor cables). See "Connect the monitor" on page 11.

If your graphics card has a DVI	Contact Dell Technical Support
connector but your monitor has a	for more information.
VGA connector, then you need to
use an adapter. An adapter should
be included in the box.

30

Setup and Quick Reference Guide