Dell 9T217 manual Light Pattern

Light Pattern	Problem Description	Suggested Resolution
GYYG	Possible system board	Perform the procedures in "System Board Problems" in
	failure.	your User’s Guide.
		If the problem persists, contact Dell.

GYGY	Memory modules are	Ensure that there are no special memory
	detected, but a memory	module/memory connector placement requirements (see
	configuration or	"Memory" in your User’s Guide).
	compatibility error exists.	Verify that the memory modules that you are installing
		are compatible with your computer (see "Memory" in
		your User’s Guide).
		Reinstall the memory modules and then restart the
		computer.
		If the problem persists, contact Dell.
GYGG	Possible system board	Perform the procedure in "System Board Problems" and
	resource and/or hardware	see "Resolving Software and Hardware Incompatibilities"
	failure.	in your User’s Guide.
		If the problem persists, contact Dell.
GGYY	Possible expansion card	1 Determine if a conflict exists by removing a card (not
	failure.	the video card) and then restarting the computer.
		2 If the problem persists, reinstall the card that you
		removed, remove a different card, and then restart the
		computer.

3 Repeat this process for each card. If the computer starts normally, troubleshoot the last card removed from the computer for resource conflicts (see "Resolving Software and Hardware Incompatibilities" in your User’s Guide).

		4 If the problem persists, contact Dell.
GGGY	Other failures has	Ensure that the cables are properly connected from the
	occurred.	hard drive, CD drive, and DVD drive to the system
		board.
		If the problem persists, contact Dell.

Setup and Quick Reference Guide

29