136 Adding and Replacing Parts
1
Follow the procedures in "Before You Begin" on page 115.
2
Remove the hinge cover (see "Hinge Cover" on page118).
3
Remove the keyboard (see "Keyboard" on page119).
4
Ground yourself by touching one of the metal connectors on the back of the computer.
NOTE: If you leave the area, ground yourself again when you return to the computer.
NOTICE: Ensure that the protective sleeves on the antenna cables remain in place while you are moving the
cables.
5
Move the antenna cables away from the area in which the card will be installed.
6
Release the card by pushing the metal securing brackets away from the card until the card pops up
slightly.
7
Lift the card out of its connector.
NOTICE: When installing this card, ensure that the two antenna cables are not under the card. The antenna
cables are designed to lay across the top of the FCM card and in the protective sleeve. Installing the card on top of
these antenna cables may cause damage to your computer. Also, do not install the FCM card in the WLAN card
connector. The FCM card is designed to work only in the WWAN card connector. Installing the card in the wrong
slot may cause damage to your computer.
1metal securing tabs (2) 2FCM card
1
2