Using Cards 67

ExpressCard

1
Place the ExpressCard in the adapter (the adapter is included with the ExpressCard).
2
Install the ExpressCard with adapter the same way as a PC Card (see "PC Cards" on page 65).
Removing a Card or Blank
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product
Information Guide
.
NOTICE: Click the icon in the taskbar to select a card and stop it from functioning before you remove it from
the computer. If you do not stop the card in the configuration utility, you could lose data. Do not attempt to eject a
card by pulling its cable, if one is attached.
Press the latch and remove the card or blank. For some latches, you must press the latch twice: once to
pop the latch out, and then a second time to pop the card out.