Dell Printer Problems

Printer Problems
Fill out the Diagnostics Checklist as you complete these checks.

properly.
lEnsure that the electrical outlet is working by testing it with another device, such as a lamp.
lEnsure that the main power cable and front panel cable are securely connected to the system board.

Ifthepowerlightisamberandgreenorsteadyamber— A device might be malfunctioning or incorrectly installed.
lRemove and then reinstall the memory modules (see Memory).
lRemove and then reinstall any cards.
lRemove and then reinstall the graphics card, if applicable.

Ifthepowerlightisblinkingamber—
The computer is receiving electrical power, but an internal power problem might exist.
lEnsure that the voltage selection switch is set to match the AC power at your location (if applicable).
lEnsure that the processor power cable is securely connected to the system board.

Eliminateinterference— Some possible causes of interference are:
lPower, keyboard, and mouse extension cables
lToo many devices on a power strip
lMultiple power strips connected to the same electrical outlet
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTE: If you need technical assistance for your printer, contact the printer's manufacturer.

Checktheprinterdocumentation— See the printer documentation for setup and troubleshooting information.

Ensure that the printer is turned on

Checktheprintercableconnections— 
lSee the printer documentation for cable connection information.
lEnsure that the printer cables are securely connected to the printer and the computer.

Test the electrical outlet — 
Ensure that the electrical outlet is working by testing it with another device, such as a lamp. —

Verify that the printer is recognized by Windows —

1. Click the Start button, click Control Panel, and then click Printers and Other Hardware.
2. Click View installed printers or fax printers.
If the printer is listed, right-click the printer icon.
3. Click Properties and click the Ports tab. For a parallel printer, ensure that the Print to the following port(s): setting is LPT1 (Printer
Port). For a USB printer, ensure that the Print to the following port(s): setting is USB.

Reinstalltheprinterdriver— See the printer documentation for instructions.