138 Removing and Installing Parts
8
If you are not replacing the drive, replace the drive-panel insert (see
"Replacing the Drive-Panel Insert" on page126).
9
Replace the drive panel (see "Replacing the Drive Panel" on page127).
10
Replace the computer cover (see "Replacing the Computer Cover" on
page172.
11
If you are not replacing the drive, then ensure that these changes are
reflected in the BIOS. When you restart your computer, enter system
setup (see "System Setup" on page178). On the setup screen go to the
"Drives" section and under
Diskette Drive
set the value to "
none"
.
Installing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page 99.
2
Remove the computer cover (see "Removing the Computer Cover" on
page101).
3
Lay the computer on its side so that the system board is on the bottom of
the inside of the computer.
4
Remove the drive panel (see "Removing the Drive Panel" on page124).
5
If installing a new floppy drive, remove the drive panel insert (see
"Removing the Drive-Panel Insert" on page125).
6
If you are installing a new floppy drive, remove the shoulder screws from
the inside of the drive-panel insert and attach the screws to the new drive.
See "Removing the Drive-Panel Insert" on page125.
1floppy drive 2shoulder screws (4)
1
2
book.book Page 138 Tuesday, November 27, 2007 10:29 AM