Dell DC01L, GX404 owner manual Book.book Page 37 Tuesday, November 27, 2007 1029 AM

book.book Page 37 Tuesday, November 27, 2007 10:29 AM

6In the Specify Volume Size window, click the Volume Size desired, then click Next.

7Click Finish to create the volume, or click Back to make changes.

Creating a RAID Level 1 Configuration

NOTICE: The following procedure will result in the loss of all data on the hard drives in your RAID configuration. Back up any data you want to keep before continuing.

1Set your computer to RAID-enabled mode (see "Setting Your Computer to RAID-Enabled Mode" on page 33).

2Click the Start button and point to Programs→Intel(R) Application Accelerator→Intel Matrix Storage Manager to launch the Intel® Storage Utility.

NOTE: If you do not see an Actions menu option, you have not yet set your computer to RAID-enabled mode (see "Setting Your Computer to RAID- Enabled Mode" on page 33).

3On the Actions menu, select Create RAID Volume to launch the Create RAID Volume Wizard.

4Click Next at the first screen.

5Confirm the volume name, select RAID 1 as the RAID level, and then click Next to continue.

6On the Select Volume Location screen, click the first hard drive you want to use to create your RAID level 0 volume, then click the right arrow. Click to add a second hard drive until two drives appear in the Selected window, and then click Next.

7In the Specify Volume Size window, select the Volume Size desired, then click Next.

8Click Finish to create the volume, or click Back to make changes.

9Follow Microsoft Windows procedures for creating a partition on the new RAID volume.

Setting Up and Using Your Computer

37