Removing and Installing Parts 143
8
Gently slide the drive into place till it clicks in securely.
NOTE: Ensure that the Media Card Reader is installed before connecting the
USBcable.
9
Connect the USB cable to the back of the Media Card Reader and to the
USB connector on the system board (see "System Board Components" on
page103).
10
Route the USB cable through the cable routing clip.
11
Replace the drive panel (see "Replacing the Drive Panel" on page127).
12
Replace the computer cover (see "Replacing the Computer Cover" on
page172).
13
Turn on the system and enter system setup (see "System Setup" on
page178). Set the
USB for FlexBay
value to
ON
.
1Media Card Reader (optional) 2 USB cable
2
1
book.book Page 143 Tuesday, November 27, 2007 10:29 AM