book.book Page 141 Tuesday, November 27, 2007 10:29 AM

5Disconnect the USB cable on the back of the Media Card Reader. Disconnect the other end of the cable from the USB connector on the system board (see "System Board Components" on page 103). Remove the cable from any clips and lift out of the computer.

2

1

3

1 sliding plate

2 sliding plate lever 3 Media Card Reader (not

 

present on all computers)

6Pull the sliding plate towards the bottom of the system and hold; then, slide the drive out through the front of the computer.

7Replace the drive panel insert (see "Replacing the Drive-Panel Insert" on page 126).

8Replace the drive panel (see "Replacing the Drive Panel" on page 127).

9Replace the computer cover (see "Replacing the Computer Cover" on page 172).

10Turn on the system and enter system setup (see "System Setup" on page 178). Set the USB for FlexBay value to OFF.

Removing and Installing Parts

141

Page 140 Page 142
Page 141
Image 141
Dell DC01L, GX404 owner manual 141
Page 140 Page 142
Top Page Image Contents