4. Attach the power cable to the interposer board on the floppy drive.
5. Attach the CD/DVD drive cable and the power cable to the CD/DVD drive.
6. Connect the floppy-drive cable to the DSKT connector on the system board.
7. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
8. Close the computer cover and attach the computer stand (optional).
9. Reconnect your computer and devices to their electrical outlets, and turn them on.
10. Enter system setup and update the appropriate Diskette Drive A option to reflect the size and capacity of your new floppy drive.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
After you open and close the cover, the chassis intrusion detector, if enabled, causes the following message to appear on the screen at the next
computer start-up:
ALERT! Cover was previously removed.
11. Reset the chassis intrusion detector by changing Chassis Intrusion to Enabled or Enabled-Silent.
1
connector notch
2
interposer board alignment hole
3
floppy-drive cable
4
lever
NOTICE: To connect a network cable, first plug the cable into the network wall jack, and then plug it into the computer.