Dell GX60 Chassis Intrusion Switch

Back to Contents Page
Chassis Intrusion Switch
Dell™OptiPlex™GX60SystemsUser'sGuide
Replacing the Chassis Intrusion Switch
Resetting the Chassis Intrusion Detector
Replacing the Chassis Intrusion Switch

1. Follow the procedures in "Before You Begin."
2. Disconnect the chassis intrusion switch cable from the control panel on the front of the computer.

Note the routing of the chassis intrusion cable as you remove it from the chassis. Chassis hooks may hold the cable in place inside the chassis.
3. Slide the chassis intrusion switch out of its slot, and remove the switch and its attached cable from the computer.


Small Form-Factor Computer

Small Desktop Computer
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions.