Dell manual J2936bk0.book Page 88 Tuesday, September 2, 2003 306 PM

Models: J2936

1 148
Download 148 pages 30.61 Kb
Page 88
Image 88

J2936bk0.book Page 88 Tuesday, September 2, 2003 3:06 PM

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

8Connect the floppy-drive power cable to the back of the drive.

CAUTION: Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").

9Connect the data cable to the back of the drive and to the floppy drive connector on the system board (see page 77).

10Position the top of the floppy drive bracket so that it is completely flush with the bottom of the upper drive bay, and then slide the floppy drive bracket forward into position.

NOTE: The top of the floppy drive bracket has two slots that fit into two clips on the bottom of the upper drive bay. When the floppy drive bracket is properly mounted, it remains in place without support.

11Secure the floppy drive bracket with the top bracket screw that came with your drive.

88

Adding Parts

Page 88
Image 88
Dell manual J2936bk0.book Page 88 Tuesday, September 2, 2003 306 PM