Adding Parts 97
CAUTION: To guard against electrical shock, always unplug your computer from
the electrical outlet before opening the cover.
5Remove the computer cover (see page 74).
6Lay the computer on its side so that the system board is on the bottom of the inside of
the computer.
NOTE: For easier access to the memory modules, remove the AGP card (see page 81) first.
7If necessary, remove a memory module:
aPress out the securing clip at each end of the memory module connector.
bGrasp the module and pull up.
If the module is difficult to remove, gently ease the module back and forth to
remove it from the connector.
8To insert a module, press out the securing clip at each end of the memory module
connector.
securing clips (2)
connector
memory connector closest
to microprocessor
J2936bk0.book Page 97 Tuesday, September 2, 2003 3:06 PM