Back to Contents Page
Charger Board
Dell™ XPS™ M1530 Service Manual
Removing the Charger Board
Replacing the Charger Board
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.
Removing the Charger Board
1.Follow the procedures in Before You Begin.
2.Remove the system board (see Removing the System Board).
3.Remove the two screws that secure the charger board to the system board.
1 | screw (2) | 2 | AC adapter connector |
|
|
|
|
3 | USB connector (2) | 4 | charger board |
|
|
|
|
5 | VGA connector | 6 | network connector |
|
|
|
|
7 | system board | 8 | HDMI connector |
|
|
|
|
9 | IEEE 1394a connector |
|
|
|
|
|
|
4. Turn the system board over and detach the charger board from the system board connector.
1 | charger board (view from below) | 2 | system board connector |
|
|
|
|
|
|
|
|
