228 Troubleshooting: Your Storage Array Software
Table 19-3. Additional Status Icons
Status Icon Description
Unsupported Alerts
with a Needs
Upgrade Status
Setting an alert on a s storage array with a Needs
Upgrade status is not supported. In this case, the
storage array shows both a Needs Upgrade status
and an Unsupported Alerts icon in the Tree view.
The Unsupported Alerts icon indicates that the
storage array cannot be monitored.
Alert Set If you installed the Event Monitor with MDSM,
and if you have set alerts, the Alert Set icon
appears next to the storage array status in the
Tree view for which the alerts have been set.
Setting an Alert at
the Parent Node
Level
You can set alerts at any of the nodes in the Tree
view. Setting an alert at a parent node level, such
as at a host level, sets alert fir any child nodes. If
you set an alert at a parent node level and any of
the in-band storage array child nodes have a
Needs Upgrade status, the Alert Disables status
icon appears next to the parent node in the tree
view.
Adding a Storage
Array
The Contacting Storage Array icon is shown in
the Tree view and Table view until the current
status of each managed storage array is known.
The Contacting Storage Array icon is shown in
the EMW Status Bar and the AMW Status Bar
and the tooltip shows Contacting Storage arrays.
As each storage array is contacted, its current
status is obtained and shown in the Tree view and
Table view. The applicable statuses are the
Optimal, Needs Attention, Fixing, or
Unresponsive.
Adding a Storage
Array OK
No problems were encountered while adding the
storage array.
MDSM software continues to check for any
status change events.
Adding a Storage
Array Error
Appears only when an error occurs.
book.book Page 228 Wednesday, May 26, 2010 2:14 PM