Management: Firmware Downloads 195
CAUTION: Risk of making expansion enclosure EMM unusable – Do not make
any configuration changes to the storage array while downloading expansion
enclosure EMM firmware. Doing so could cause the firmware download to fail
and make the selected expansion enclosure unusable.
1
Perform one of these actions:
•In the AMW, select
Advanced
Maintenance
Download
EMM
Firmware
.
• Select the
Support
tab, and click
Download Firmware
. In the dialog
that appears, select the
EMM firmware
, and click
OK
.
The
Download Environmental (EMM) Firmware
dialog appears.
2
In the
Select enclosures
area, either select each expansion enclosure to
which you want to download firmware, or select the
Select All
to select all
of the expansion enclosures in the storage array.
Each selected expansion enclosure should have the same product ID.
3
Click
Select File
.
The
Select Environmental (EMM) Card Firmware File
dialog appears.
4
Select the file to download, and click
OK
.
5
Click
Start
.
6
Click
Yes
to continue with the firmware download,
NOTE: If you click Stop while a firmware download is in progress, the
download-in-progress finishes before the operation stops. The status for the
remaining expansion enclosures changes to Canceled.
7
Monitor the progress and completion status of the download to the
expansion enclosures. The progress and status of each expansion enclosure
that is participating in the download appears in the Status column of the
Select enclosures table.
NOTE: Each firmware download can take several minutes to complete.
8
Perform one of these actions depending on whether the download
succeeded:
book.book Page 195 Wednesday, May 26, 2010 2:14 PM