Dell MD3200i, MD3220i - page 127

Configuration: Disk Groups and Virtual Disks 127
1 In the AMW, select the Mappings tab.
2 In the Topology pane, select:
•
Default Group
• Undefined mappings node
• Individual defined mapping
• Host group
• Host
3 In the toolbar, select Mappings  Define  Additional Mapping .
The
Define Additional Mapping window is displayed.
4 In Host group or host , select the appropriate host group or host.
All defined hosts, host groups, and the default group appear in the list.
NOTE: When configuring an iSCSI storage array, including the MD3200i or
MD3220i, if a host or a host group is selected that does not have a SAS host
bus adapter (SAS HBA) host port defined, a warning dialog appears.
5 In Logical unit number , select a LUN. The supported LUNs are 0 through
255.
6 Select the virtual disk to be mapped in the Virtual Disk area.
The Virtual Disk area lists the names and capacity of the virtual disks that
are available for mapping based on the selected host group or selected
host.
7 Click Add .
NOTE: The Add button is inactive until a host group or host, LUN, and virtual
disk are selected.
8 To define additional mappings, repeat step 4 through step 7.
NOTE: After a virtual disk has been mapped once, it is no longer available in
the Virtual Disk area.
9 Click Close .
The mappings are saved. The Topology pane and the Defined Mappings
pane in the Mappings tab are updated to reflect the mappings.
book.book Page 127 Wednesday, May 26, 2010 2:14 PM