Dell MD3220i, MD3200i Changing the Virtual Disk Modification Priority, Customize settings, 108

•Customize settings.

6 Click Next.

7In the Customize Advanced Virtual Disk Parameters window, select the appropriate Virtual Disk I/O characteristics type. You can select:

•File system (typical)

•Database

•Multimedia

•Custom

NOTE: If you select Custom, you must select an appropriate segment size.

8Select the appropriate Preferred RAID controller module ownership and click Next.

The Specify Virtual Disk-to-LUN Mapping window is displayed.

9In the Specify Virtual Disk-to-LUN Mapping window, you can select:

•Default Mapping

•The appropriate Host type

•Map later Using Mappings View.

10Click Finish.

The virtual disks are created.

Changing the Virtual Disk Modification Priority

You can specify the modification priority setting for a single virtual disk or multiple virtual disks on a storage array.

Guidelines to change the modification priority of a virtual disk:

•If more than one virtual disk is selected, the modification priority defaults to the lowest priority. The current priority is shown only if a single virtual disk is selected.

•Changing the modification priority by using this option modifies the priority for the selected virtual disks.

To change the virtual disk modification priority:

1In the AMW, select the Logical tab.

2Select a virtual disk.

108

Configuration: Disk Groups and Virtual Disks