76 Configuration: About Your Storage Array
• Replacing an e-mail address—In the
Configured email addresses
area,
select the e-mail address to be replaced, type the replacement e-mail
address in
Email address
, and click
Replace
.
• Deleting an e-mail address—In the
Configured email addresses
area,
select the e-mail address, and click
Delete
.
• Validating an e-mail address—Type the e-mail address in
Email
address
or select the e-mail address in the
Configured email addresses
area, and click
Test
. A test e-mail is sent to the selected e-mail
address. A dialog with the results of the test and any error appears.
8
For the selected e-mail address, in
Information To Send
, select:
•
Event Only
—The alert e-mail contains only the event information.
This alert type is the default.
•
Event + Profile
—The alert e-mail contains the event information
and the storage array profile.
•
Event + Support
—The alert e-mail contains the event information
and a compressed file that contains complete support information for
the storage array that has generated the alert.
9
For the selected e-mail address, in
Frequency
, select:
•
Every event
—Sends an alert e-mail whenever an event occurs. This is
the default option.
•
Every x hours
—Sends an alert e-mail after the specified time interval
if an event occurred during that time interval. You can select this
option only if you have selected either
Event + Profile
or
Event +
Support
in the
Information To Send
drop down list.
10
Click
OK
.
An alert icon appears next to each node in the Tree view where an alert is
set.
To ensure that the e-mail is sent successfully:
• You must provide a SMTP mail server name and an e-mail sender address
for the e-mail addresses to work.
• The e-mail addresses that you had previously configured appear in the
Configured e-mail addresses area.
book.book Page 76 Wednesday, May 26, 2010 2:14 PM