Dell PP10L owner manual Internal Card With Bluetooth Wireless Technology

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

dPull up on the keyboard connector tab to disconnect the keyboard connector from the system board.

keyboard tabs

palm rest

M2.5 x 5-mm screws (2)

NOTE: When you replace the keyboard, ensure that the keyboard tabs are completely in place to avoid scratching the palm rest.

Internal Card With Bluetooth® Wireless Technology

If you ordered an internal card with Bluetooth wireless technology with your computer, the card is already installed.

CAUTION: Before working inside your computer, read the safety instructions in the Product Information Guide.

1Ensure that the work surface is flat and clean to prevent scratching the computer cover.

2Save and close any open files, exit any open programs, and then shut down the computer (see page 32).

3If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.

4Disconnect the computer from the electrical outlet.

5Wait 10 to 20 seconds, and then disconnect any attached devices.

6Remove any installed PC Cards, batteries, and module bay devices.

NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts. Ground yourself by touching a metal connector on the back of the computer. Continue to ground yourself periodically during this procedure.

98

Adding and Replacing Parts